Description

As with any other power tool, before starting to work with an angle grinder, you should read the instructions. Neglect of safety regulations can lead to death or cause significant damage to health. The main dangerous factors when working with USM are: Possibility of electric shock; The possibility of injury by parts of the processed material flying out from under the circle of the grinder or parts of the working circle in case of its destruction; The negative impact of dust released during the operation of the ear on the respiratory organs, vision, skin. «Biting» the disk in the workpiece, which can lead to a jerk of the ear and rupture of the disk. The following safety regulations must be observed (the list may be far from exhaustive): The main thing in the safe use of USM is to anticipate the behavior of the parts of the cut product at the time of their separation; When working with the machine, it is necessary to take a stable pose and use a protective mask covering the face, as well as clothing, shoes, gloves and a headdress that exclude injuries by fast-flying particles of the disk and the processed material, taking into account the ricochet from close obstacles, the seizure of clothing and hair by the tool; The cord of the machine must be protected from accidental damage, its contact with hot surfaces, petroleum products, and chemically active substances is not allowed. When replacing the USB drive, it should be disconnected from the network; It is prohibited: Use the USM without a standard protective guard of the disk; Bend the power cable closer than 5 cm from the USM case and carry the tool by the cable; Process materials containing asbestos, cement, chalk and abrasives. Allow children to the car; Operate the USM in conditions of exposure to drops, in rooms with high humidity, as well as outdoors during rain or snowfall; Operate the USM in rooms with an explosive or chemically active environment that destroys metals and insulation; Use replacement wheels with expired warranty period without their preliminary mechanical strength test; Use saw blades from a circular saw; Operate the machine from ladders; Work with USM inside boilers, tanks, power supplies; Leave unattended a car connected to the electrical network; Pull and twist the cord, subject it to loads;