Kategoriya
Магистральный фильтр для винтовой компрессор SAAB Baosi havo filtr
04.03.2026
Sáne
0
Kóriwler
0
pikirler
#782969
ID
Járiya haqqında
- Kategoriya
- Nasos va kompressor ehtiyot qismlari
- Járiya túri
- Úskeneler
- Sáne
- 04.03.2026
- Kóriwler
- 0
- Járiya nomeri
- #782969
Mánzil
Toshkent viloyati
Mánzil
Ташкент, Ташкентская область
- Wálayat
- Toshkent viloyati
Tariypı
Sizga vintovoy kompressor uchun havo filtrlarini tavsiya qilamiz. 1,5 m3/2.4 m3/3,8 m3/ 5 m3/ 6 m3/ va hokazo. Sifatli nahsulot. Tel: 94-001-92-27 Toshkent shahri, Olmazor tumani, Chuqursoy “Nasoslar” The image shows three SAAB Compressed Air Filters with different filtration precision levels. These are typically used in sequence to clean compressed air from oil, water, and particles. Here are the specs for each model shown: | Feature | SGE-100-A (Front) | SGE-100-T (Middle) | SGE-100-C (Back) | | :--- | :--- | :--- | :--- | | Flow rate | 3.8 Nm³/min | 3.8 Nm³/min | 3.8 Nm³/min | | Connection | DN40 | DN40 | DN40 | | Max Pressure | 1.0 Mpa | 1.0 Mpa | 1.0 Mpa | | Max Temp | 80 °C | 80 °C | 80 °C | | Precision | 0.1 μm | 1 μm | 3 μm | Typical Installation Order: To maximize filter life, you should install them in this order (from coarsest to finest): 1. SGE-100-C (3 μm): Pre-filter for large particles. 2. SGE-100-T (1 μm): General purpose filtration. 3. SGE-100-A (0.1 μm): High-efficiency oil removal/fine filtration.
656 791 sum
Baha bahalaw
Uqsas daǵazalar salıstırılmaqta…
Járiya mánzili
Toshkent viloyati
Mánzil
Ташкент, Ташкентская область
- Wálayat
- Toshkent viloyati
Baylanıs ushın telefon
Járiya haqqında
- Kategoriya
- Nasos va kompressor ehtiyot qismlari
- Járiya túri
- Úskeneler
- Sáne
- 04.03.2026
- Kóriwler
- 0
- Járiya nomeri
- #782969
Tariypı
Sizga vintovoy kompressor uchun havo filtrlarini tavsiya qilamiz. 1,5 m3/2.4 m3/3,8 m3/ 5 m3/ 6 m3/ va hokazo. Sifatli nahsulot. Tel: 94-001-92-27 Toshkent shahri, Olmazor tumani, Chuqursoy “Nasoslar” The image shows three SAAB Compressed Air Filters with different filtration precision levels. These are typically used in sequence to clean compressed air from oil, water, and particles. Here are the specs for each model shown: | Feature | SGE-100-A (Front) | SGE-100-T (Middle) | SGE-100-C (Back) | | :--- | :--- | :--- | :--- | | Flow rate | 3.8 Nm³/min | 3.8 Nm³/min | 3.8 Nm³/min | | Connection | DN40 | DN40 | DN40 | | Max Pressure | 1.0 Mpa | 1.0 Mpa | 1.0 Mpa | | Max Temp | 80 °C | 80 °C | 80 °C | | Precision | 0.1 μm | 1 μm | 3 μm | Typical Installation Order: To maximize filter life, you should install them in this order (from coarsest to finest): 1. SGE-100-C (3 μm): Pre-filter for large particles. 2. SGE-100-T (1 μm): General purpose filtration. 3. SGE-100-A (0.1 μm): High-efficiency oil removal/fine filtration.
Loading…
Loading…
Jaylasıwı
Toshkent viloyati
Karta júklenbekte…
